English
Deutsch
Français
KEY SPECS
Cutterbar – Type: SCH® Easy Cut with roller guides, spring steep guards, and bolted sectionsStandard: single knife or dual knife
Cut width (length): 7.6 m25 ft
Reel type: Hydraulic
Fingers: Plastic
Belt width: V-guided draper belt: 106.7 cm42 in.
Platform length:
Overall operating depth:
Transport width, field position:
Transport width on wheel, less dividers:
Transport length, hitch extended: 9 m29.6 ft
CUTTERBAR
Type: SCH® Easy Cut with roller guides, spring steep guards, and bolted sectionsStandard: single knife or dual knife
Cut width (length): 7.6 m25 ft
Knife drive: Two hydraulic motors and two knife drives
Knife speed: 1,100 to 1,440 spm
Stroke length: 84 mm3.3 in.
Cutterbar tilt: Hydraulic, adjustable from cab
REEL
Reel type: Hydraulic
Number of bats: Six
Fingers: Plastic
Diameter: 1118 mm44 in.
Height control: Hydraulic, adjustable from cab
Speed control: Hydro handle, in cab
Reel lift: Hydraulic, adjustable from cab
Reel fore and aft: Hydraulic, adjustable from cab
Reel resume:
Reel reverse:
Operating speeds:
Operating speeds (54-inch reel):
DRAPER AND DECKS
Belt width: V-guided draper belt: 106.7 cm42 in.
Delivery opening width: Delivery, double swath opening: 137.2 cm54 in.Delivery, single swath opening: 203.2 cm80 in.
Delivery opening height: 205.7 cm81 in.
Cleat height:
Draper drive: Two hydraulic motors
Operating speed: 0 to 232 m/min0 to 760 fpm
Speed control: Adjustable in windrower cab
Remote canvas speed control: Standard
Deck tilt: Standard
Deck extensions: Optional, dealer-installed deck extensions: 35.6 cm14 in.
HEADER HEIGHT SENSING
Type:
Header height sensing on the ground:
Header height sensing off the ground:
AUXILIARY TOP AUGER
Type: Optional: factory-installed cross-pea auger
DIMENSIONS
Platform length:
Overall operating depth:
Operating width (field): 7.6 m25 ft
Transport width (reel fully retracted): 2.6 m8.5 ft
Transport width, field position:
Transport width on wheel, less dividers:
Transport height: 2.44 m8 ft
Transport length, hitch extended: 9 m29.6 ft
WEIGHT
Approximate weight (base platform without reel): 1036 kg2869 lb
Approximate weight (base platform with reel): 2280 kg5026 lb
Approximate weight (with transport):
CENTER OPENING / CROP DELIVERY
Center opening width between belts:
Back sheet opening:
Deck shift / double windrow capability (manual / hydraulic / not available):
GAUGE WHEELS AND TRANSPORTATION
Gauge wheels: Adjustable castoring gauge wheel optional
Integrated slow speed transport system: Self-contained transport, including hitch, jack and axle, is conveniently stored on the swather table
ADDITIONAL INFORMATION
Date collected:
D630 Draper
• 30 ft. (9.1 m) cut width
• Compatible with W200M, W235M, W235R and W260R
• Hydraulic tilt John Deere cutter bar
• Ground speed matching
• Integrated controls
-
The 2130 Planter provides better performance in irregular, clay and straw soils. It attaches to the tractor drawbar. Furthermore, it is available in 26 and 30 rows configurations.
• 25 percent less ground disturbance with the 2100 pivoted multi-opener
• 23 percent better control of seed placement due the combination of the EmergePro™ row-unit with the 2100 pivoted multi-opener
• 16 percent better plant stand
• 8 percent more fuel savings since the 2100 pivoted multi-opener requires less tractor power
• 7 percent more seed savings with the RowCommand™ system
• 3 percent more fertilizer savings with Section Control
• Increased control of operation with the variable rate of seed and fertilizer
• Accurate straw cutting, even in difficult conditions -
• 235hp
• Integrated AutoTrac™ steering system helps maintain crop quality even at faster cutting speeds
• JDLink™ enabled
• Optional 24mph transport speed -
All livestock is sold with vaccination and treatment history and other titles of ownership. We make sure that livestock is disease free through vigorous testing.
-
Plant 6 to 8 seeds in each basin. Large white fruit keep well but a portion of the stem should remain attached.
Improved non-stop round module harvesting with 4.4 mph max row unit sync speed. 13.5L Tier 4 Engine with 590 peak horsepower. Next generation ProDrive™ with anti-slip regulation. New Premium LED lighting package.
- Struck capacity: 9.2 m³ (12.0 cu. yd.)
- Heaped capacity: 12.2 m³ (16.0 cu. yd.)
- Bowl width: 3.7 m (12 ft. 0 in.)
- The feed rate has been increased to 9 kg per second, equipped with a newly upgraded threshing separation device, which is superior to the same level
- The newly optimized grid intaglio works perfectly with the new drum to ensure that the grains are separated from the material flow quickly and efficiently
- Equipped with John Deere 165 horsepower 4045 turbocharged with high pressure common rail electronic control engine, high reliability and good fuel economy
- Increase the fuel tank volume up to 300 liters, 4.2 cubic meters super large grain tank, unloading speed of 36 liters per second
Main applicable crops: Wheat, soybean, rape, sorghum, millet, etc.
Cutting width (m): 4.57 or 5.4
Feeding amount (kg/sec): Wheat: 7.0 (4.57 meters cutting header); 8.0 (5.4 meters cutting header)
Ground clearance (m): 0.495
Threshing drum type: Patterned
Roller width×diameter (m): 1.28×0.61
Separation mechanism type: Five-button document stepper
Separation area (square meters): 5.38
Type of cleaning organization: Double-layer vibrating wind screen
Cleaning area (square meters): 4.3
Grain tank volume (m3): 4.6
engine model: JD6068
Engine power (hp/kw): 185/136
Dimensions (length × width × height, meters): 7.13×3.26×3.84 (transport size without header)
Structure mass (kg): 7190 (without header without chopper)
Walking speed (km/h) Mechanical: 1.05-20 (forward gear) 2.30-5.55 (reverse gear) Hydraulic pressure: 0-24
Front wheel track (m): 2.8
Rear wheel track (m): 2.57
Air Conditioning: Optional heating and cooling air conditioning
Option Wheat accessories, corn accessories
- Struck capacity 10.7 m³ (14 cu. yd.)
- Heaped capacity 13.8 m³ (18 cu. yd.)
- Combine Advisor™ package helps to set, optimize, and automate main combine functions when conditions change.
- Fully automated yield sensor calibration with ActiveYield™ supplies accurate data with no time spent calibrating.
- Comfortable S700 cab is common with tractors and sprayers for ease of use.
- Continued quality manufacturing of S-Series combines maximizes uptime and productivity.
- John Deere PowerTech 4.5 L Engine,powerful,fuel-efficient, reliable, maintenance friendly.
- Configured with John Deere Gearbox, high-efficiency and easy operation.
- The driver’s cab,with a superlative visual field, is spacious and comfortable with good seal performance and low noise.
- The hydraulic system is stable and reliable, fuel tank capacity was increased to 150 L.
- Combine Advisor™ package helps to set, optimize and automate main combine functions when conditions change.
- Fully automated yield sensor calibration with ActiveYield™ supplies accurate data with no time spent calibrating.
- Comfortable S700 cab is common with tractors and sprayers for ease of use.
- Continued quality manufacturing of S-Series combines maximizes uptime and productivity.
- Combine Advisor™ package helps to set, optimize, and automate main combine functions when conditions change.
- Fully automated yield sensor calibration with ActiveYield™ supplies accurate data with no time spent calibrating.
- Comfortable S700 cab is common with tractors and sprayers for ease of use.
- Continued quality manufacturing of S-Series combines maximizes uptime and productivity.
- Engine: 55 HP, 2400 RPM, 3 Cylinders, Coolant cooled with overflow reservoir, Turbo charged
- Air Filter: Dry type, Dual element
- Transmission: 9 Forward + 3 Reverse speed, Collarshift Gearbox
- Hydraulics: Lifting Capacity 1800 kgf at lower link ends
- 50 engine HP at 2100 rated ERPM
- Power Steering
- Oil Immersed Disc Brakes
- Dry Type Air Filter
- Oil Jet for Piston Cooling
- Top Shaft Lubrication
- Piston Jet Cooling
- Engine: 65 HP, 2400 RPM, 3 Cylinders, Rotary FIP, Coolant cooled with overflow reservoir, Turbocharged
- Air Filter: Dry-type, Dual element
- Transmission: 9 Forward + 3 Reverse speed, Collarshift Gearbox
- Hydraulics: Lifting Capacity 1800 kg at lower link ends.
Reviews
There are no reviews yet.