English
Deutsch
Français
POWER REQUIREMENTS
PTO speed: 540 or 1,000 rpm
HP 1000 rpm 1-3/8 in. PTO: 48-112 kW 65-150 hp
Powerline type: Double-telescoping Grob spline
Hydraulic pressure required: 13,790 kPa 2,000 psi
CUTTERBAR
Type: John Deere
Cutting width: 3.0 m 9.75 ft\
Cutting height: Without extension: 28 to 98 mm 1.1 to 3.7 in.
Number of disks: 6
Number of knives: 12
Disk speed: 2,650 rpm
Knife tip speed: 307 km/h 191 mph
Disk drive: Gear
Lubrication: Hy-Guard oil
Oil reservoir capacity: 7 L 7.4 qt
Cutterbar oil check: Drain plug
Cutterbar oil check: Drain plug
Cutterbar angle: Adjustable
Angle adjustment: Mechanical or hydraulic
Cutterbar protection: Shearhub
CONDITIONER
Impeller: Width 1,854 mm 73 in.Diameter 594 mm 23.4 in.Number of V-tines 45Number of speeds TwoDrive 3-V powerband belt and sheavesConditioner hood Infinite adjust, single hand crank
Rolls: Width 1,854 mm 73 in.Diameter 254 mm 10 in.Type of material UrethaneDesign Recessed cleatSpeed 664 rpmDrive Telescoping shaft
TRACTOR HOOKUP
Standard Hitch: Clevis
Rockshaft swivel hitch: Optional
Ball joint equal angle hitch: Optional
DIMENSIONS
Overall width: Transport 3.5 m 11.5 ft
Overall length: Conventional transport With equal angle tongue: 6.2 m 20.5 ft
Weight: With urethane roll conditioner 2,273 kg 5,012 lbWith impeller conditioner 2,130 kg 4,696 lb
Standard tires: 11L-15 standard 31×13.5L 15 optional
GENERAL
Are wrenches required for adjusting?: Roll pressure – Yes Roll spacing – Yes
630 Mower-Conditioner
• Urethane roll conditioner available
• Cutting platform is gear-driven
• Adjustable gauge shoes
• Flotation tires
-
Equipment, Farming Inputs, Harvesting (Hay & Foraging), Harvesting Equipment, Hay & Foraging, Uncategorized
• 375 hp FT4 John Deere engine.
• All-new design delivers improved serviceability with an integrated KP hoist, easy header hook-up and ground level fuel fill.
• A best-in-class cab offers easier to use controls, better display access and visibility. -
• O-Ring for Tractor transmission
• Note: This product is returnable only if it returned in its original packaging and has not been installed. -
Vegetables are rich in many vitamins and minerals that are good for your health. These include vitamins A (beta-carotene), C and E, magnesium, zinc, phosphorous and folic acid.
Vegetables nutrients help reduce obesity, lower cholesterol and lower your blood pressure.
-
Vegetables are rich in many vitamins and minerals that are good for your health. These include vitamins A (beta-carotene), C and E, magnesium, zinc, phosphorous and folic acid.
Vegetables nutrients help reduce obesity, lower cholesterol and lower your blood pressure.
- John Deere PowerTech™ 13.5L PSS
- New and improved e18™ PowerShift Transmission
- AirCushion Suspension
- New CommandView™ III cab
- John Deere PowerTech 4.5 L Engine,powerful,fuel-efficient, reliable, maintenance friendly.
- Configured with John Deere Gearbox, high-efficiency and easy operation.
- The driver’s cab,with a superlative visual field, is spacious and comfortable with good seal performance and low noise.
- The hydraulic system is stable and reliable, fuel tank capacity was increased to 150 L.
- Combine Advisor™ package helps to set, optimize and automate main combine functions when conditions change.
- Fully automated yield sensor calibration with ActiveYield™ supplies accurate data with no time spent calibrating.
- Comfortable S700 cab is common with tractors and sprayers for ease of use
- Continued quality manufacturing of S-Series combines maximizes uptime and productivity.
- Engine: 55 HP, 2400 RPM, 3 Cylinders, Coolant cooled with overflow reservoir, Turbo charged
- Air Filter: Dry type, Dual element
- Transmission: 9 Forward + 3 Reverse speed, Collarshift Gearbox
- Hydraulics: Lifting Capacity 1800 kgf at lower link ends
• Struck capacity 10.7 m³ (14 cu. yd.)
• Heaped capacity 16.4 m³ (18 cu. yd.)
Main applicable crops: Wheat, soybean, rape, sorghum, millet, etc.
Cutting width (m): 4.57 or 5.4
Feeding amount (kg/sec): Wheat: 7.0 (4.57 meters cutting header); 8.0 (5.4 meters cutting header)
Ground clearance (m): 0.495
Threshing drum type: Patterned
Roller width×diameter (m): 1.28×0.61
Separation mechanism type: Five-button document stepper
Separation area (square meters): 5.38
Type of cleaning organization: Double-layer vibrating wind screen
Cleaning area (square meters): 4.3
Grain tank volume (m3): 4.6
engine model: JD6068
Engine power (hp/kw): 185/136
Dimensions (length × width × height, meters): 7.13×3.26×3.84 (transport size without header)
Structure mass (kg): 7190 (without header without chopper)
Walking speed (km/h) Mechanical: 1.05-20 (forward gear) 2.30-5.55 (reverse gear) Hydraulic pressure: 0-24
Front wheel track (m): 2.8
Rear wheel track (m): 2.57
Air Conditioning: Optional heating and cooling air conditioning
Option Wheat accessories, corn accessories
- 45 engine HP at 2100 rated ERPM
- Power Steering
- Oil Immersed Disc Brakes
- Dry Type Air Filter
- Oil Jet for Piston Cooling
- Top Shaft Lubrication
- Piston Jet Cooling
- Adopting CTS technology—cut-through threshing drum and dual-axial flow plate-tooth separation drum structure
- Reliable John Deere 6.8L turbocharged engine with up to 201 horsepower
- Efficient cleaning system
- Optional John Deere mature hydrostatic drive device, shorten the time of land transfer and reduce driver fatigue
- Turbo charged, fuel efficient John Deere engine 4039, 100 HP, 2100 RPM and 4 cylinders.
- SynchroSmart enabled.
- Best suited for crops like Rice, Wheat, Soyabean and Corn
- Threshing system: Rasp bar & Spike tooth
- Separation Type: Straw walker with 8 Wing Beater & Beater Grate
- Struck capacity 10.7 m³ (14 cu. yd.)
- Heaped capacity 16.4 m³ (21.5 cu. yd.)
Simple and reliable – with its robust quality and great versatility, this tractor is made to meet your needs: an uncomplicated machine that can withstand the hardest loads yet is still attractively priced.
- 4 Wheel Drive
- Smart Brakes
- 9F/3R or 12F/12R PowrReverser™ transmission
- HVAC Cab or Open Operator’s station
Reviews
There are no reviews yet.