English
Deutsch
Français
POWER REQUIREMENTS
PTO speed: 1,000 rpm
HP 1000 rpm 1-3/8 in. PTO: 67-112 kW 90-150 hp
Powerline type: Double-telescoping Grob spline (swivel is tube)
Hydraulic pressure required: 13,790 kPa 2,000 psi
CUTTERBAR
Type: John Deere
Cutting width: 3.0 m 11.5 ft\
Cutting height: 2-9.5 cm 0.8-3.7 in.
Number of disks: 7
Number of knives: 14
Disk speed: 2,650 rpm
Knife tip speed: 307 km/h 191 mph
Disk drive: Gear
Lubrication: Hy-Guard oil
Oil reservoir capacity: 8 L 8.5 U.S qt
Cutterbar oil check: Combination check, drain plug
Cutterbar oil check: Combination check, drain plug
Cutterbar angle: Adjustable
Angle adjustment: Mechanical
Cutterbar protection: Shearhub
CONDITIONER
Impeller: Width 236 cm 92.7 in.Diameter 60 cm 23.5 in.Number of V-tines 57Number of speeds TwoDrive 3-V powerband belt and sheavesConditioner hood Adjustable
Rolls: Width 236 cm 92.7 in.Diameter 25.4 cm 10 in.Type of material UrethaneDesign Recessed cleatSpeed 644 rpmDrive Telescoping shaft
TRACTOR HOOKUP
Ball joint equal angle hitch: Standard
Rockshaft swivel hitch: Optional
DIMENSIONS
Overall width: Transport 3.5 m 11.5 ft
Overall length: Conventional transport With equal angle tongue: 6.3 m 20.6 ft
Weight: With urethane roll conditioner Equal angle: 2,633 kg 5,805 lbWith impeller conditioner Equal angle: 2,479 kg 5,465 lb
Standard tires: 11L-15 standard 31×13.5L 15 optional
GENERAL
Are wrenches required for adjusting?: Roll pressure – Yes Roll spacing – Yes Header tilt – Yes
835 Mower-Conditioner
• Optional V10 rolls and Wide Swath Kit
• Modular-design cutterbar
• Adjustable roll pressure
• Hydraulic tongue positioning
-
A great source of protein and rich source Niacin, Vitamin B12, iron and zinc. Meat is the most significant dietary source of carnitine.
-
Specialist steer tyre for ploughing. Used on implements. Used as free rolling wheels on disc on plough.
Features:
• 2 Rib tread pattern
• Clear shoulders and straight sidewalls
• Recessed beadBenefits:
• Easy and accurate steering.
• Quicker turning and straight rows.
• Resistance to side slip.
• Resist cutting, snagging and stubble damage -
The 1775NT Drawn Planter is a 12-row, 76.2-cm (30-in.) planter that attaches to the drawbar or 2-point hitch of the tractor.
• 24 rows on 30-in. spacing
• Available with optional ExactEmerge™ row unit or standard in mini-hopper, 1.6-bu., or 3-bu. MaxEmerge™ 5 row unit
• Insecticide option for mini-hopper and 1.6-bu.
• 3-section frame flexes 21 degrees up & down with narrow transport of 12 ft. -
Fruits are rich in many vitamins and minerals that are good for your health. These include vitamins A (beta-carotene), C and E, magnesium, zinc, phosphorous and folic acid.
Fruit nutrients help reduce obesity, lower cholesterol and lower your blood pressure.
-
A translaminar systemic organic fungicide (suspension concentrate) for the control of diseases on crops and turf as listed.
- Struck capacity 10.7 m³ (14 cu. yd.)
- Heaped capacity 16.4 m³ (21.5 cu. yd.)
- Combine Advisor™ package helps to set, optimize, and automate main combine functions when conditions change.
- Fully automated yield sensor calibration with ActiveYield™ supplies accurate data with no time spent calibrating.
- Comfortable S700 cab is common with tractors and sprayers for ease of use.
- Continued quality manufacturing of S-Series combines maximizes uptime and productivity.
- Struck capacity: 9.2 m³ (12.0 cu. yd.)
- Heaped capacity: 12.2 m³ (16.0 cu. yd.)
- Bowl width: 3.7 m (12 ft. 0 in.)
- 9 l PowerTech PSS engine, 285 kW/387 hp max Power (ECE R120)
- Channel width 1,670 mm
- Total active separation area (ISO 6689:1997): 4.00 m²
- Total cleaning shoe area (with front chaffer according to ISO 6689:1997): 6.30 m²
- Interactive Combine Adjust (ICA) automatic combine optimisation.
- New John Deere Tracks with 30% bigger footprint
Main applicable crops: Wheat, soybean, rape, sorghum, millet, etc.
Cutting width (m): 4.57 or 5.4
Feeding amount (kg/sec): Wheat: 7.0 (4.57 meters cutting header); 8.0 (5.4 meters cutting header)
Ground clearance (m): 0.495
Threshing drum type: Patterned
Roller width×diameter (m): 1.28×0.61
Separation mechanism type: Five-button document stepper
Separation area (square meters): 5.38
Type of cleaning organization: Double-layer vibrating wind screen
Cleaning area (square meters): 4.3
Grain tank volume (m3): 4.6
engine model: JD6068
Engine power (hp/kw): 185/136
Dimensions (length × width × height, meters): 7.13×3.26×3.84 (transport size without header)
Structure mass (kg): 7190 (without header without chopper)
Walking speed (km/h) Mechanical: 1.05-20 (forward gear) 2.30-5.55 (reverse gear) Hydraulic pressure: 0-24
Front wheel track (m): 2.8
Rear wheel track (m): 2.57
Air Conditioning: Optional heating and cooling air conditioning
Option Wheat accessories, corn accessories
- Combine Advisor™ package helps to set, optimize, and automate main combine functions when conditions change.
- Fully automated yield sensor calibration with ActiveYield™ supplies accurate data with no time spent calibrating.
- Comfortable S700 cab is common with tractors and sprayers for ease of use.
- Continued quality manufacturing of S-Series combines maximizes uptime and productivity.
- 50 engine HP at 2100 rated ERPM
- Power Steering
- Oil Immersed Disc Brakes
- Dry Type Air Filter
- Oil Jet for Piston Cooling
- Top Shaft Lubrication
- Piston Jet Cooling
- The feed rate has been increased to 9 kg per second, equipped with a newly upgraded threshing separation device, which is superior to the same level
- The newly optimized grid intaglio works perfectly with the new drum to ensure that the grains are separated from the material flow quickly and efficiently
- Equipped with John Deere 165 horsepower 4045 turbocharged with high pressure common rail electronic control engine, high reliability and good fuel economy
- Increase the fuel tank volume up to 300 liters, 4.2 cubic meters super large grain tank, unloading speed of 36 liters per second
- Adopting CTS technology—cut-through threshing drum and dual-axial flow plate-tooth separation drum structure
- Reliable John Deere 6.8L turbocharged engine with up to 201 horsepower
- Efficient cleaning system
- Optional John Deere mature hydrostatic drive device, shorten the time of land transfer and reduce driver fatigue
- 4 Wheel Drive
- Smart Brakes
- 9F/3R or 12F/12R PowrReverser™ transmission
- HVAC Cab or Open Operator’s station
- Struck capacity 11.1 m³ (14.6 cu. yd.)
- Heaped capacity 15.3 m³ (20.0 cu. yd.)
- Bowl width 4.4 m (14 ft. 6 in.)
Simple and reliable – with its robust quality and great versatility, this tractor is made to meet your needs: an uncomplicated machine that can withstand the hardest loads yet is still attractively priced.
Reviews
There are no reviews yet.