KEY SPECS
Density control: From baler
Regular pickup – Bars: 4 tines bars
BALE
Length: Gate closed 3.90 to 4.80 m 12.8 to 15.7 ft 3.90 to 4.80 m 12.8 to 15.7 ft
BALE FORMING
Forming chamber: Multicrop – 7 ribbed rolls (3 reinforced) plus rear conveyor with 32 reinforced slats Silage special – 17 ribbed rolls (4 reinforced)
Density control: From baler
REGULAR PICKUP
Width: 2 m 6.56 ft
Bars: 4 tines bars
Gauge wheels: Standard – fixed gauge wheels or castor-action gauge wheels
Strippers material: Galvanized steel
Windrow compressor system: Compressor shield or compressor roll
NON-CUTTING ROTOR
Rotor: High Capacity (HC) in line concept – Hardox
Unplugging system: Clutch + reversing wrench OR wide drop floor with parallel kinematic managed from the baler
WIDE PICKUP
Width: 2.2 m 7.22 ft
Bars: 4 times bars
Gauge wheels: Standard – fixed gauge wheels or castor-action gauge wheels
Strippers material: Galvanized steel
Windrow compressor system: Compressor shield or compressor roll
STANDARD PRECUTTER
Rotor: High Capacity (HC) in line concept – Hardox
Knives: 13 – managed from the baler – individually spring loaded
Knife spacing: 80 mm 3.15 in.
Unplugging system: Wide drop floor with parallel kinematic managed from the baler
BINDING SYSTEM
Type: Standard 2 net rolls 1 optional Net wrap
TIRE SIZE
Optional: 11.5/80-15.3 15/55-17 19/45-17 500/55-20
DRIVELINE
Drive protection: Shear-bolt (RotoFlow HC only) or cam-type cut out clutch
PTO speed: 540 rpm
ADDITIONAL INFORMATION
Maintenance/chains: Optional automatic chains lubrication system
Date collected: 16 May 2017